Ductile Iron Wafer Type Electric Actuator Butterfly Valve

• Media: Oil
• Driving Mode: Electric
• Connection Form: Wafer
• Structure: Centre Sealing
• Seal Form: Force Sealed
• Valve Stem: Normal
• Work Pressure: Mid-Pressure (2.5mpa< Pn <6.4mpa)
• Working Temperature: Normal Temperature (-40°C<T<120°C)
• Material of Seal Surface: Soft Sealed
• Valve Body: Forge Welding
• Application: Industrial Usage, Water Industrial Usage
• Size: DN50-65; DN80; DN100-600
• Transport Package: Wooden Box
• Specification: DN50-65; DN80; DN100-600
• Trademark: HUIZHENG
• Origin: China
• HS Code: 8481804090
• Production Capacity: 3000

Product Description

 

Electric Actuator Wafer Butterfly Valve 

Size Range: DN40~DN600
Pressure: PN10, PN16, Class125
Body Materials: Cast Iron, Ductile Iron, WCB , Stainless Steel
Seat Materials: PTFE
Disc Materials: DI/WCB/CF8/CF8M +PTFE lined
Stem Materials: SS416, SS304, SS316
End Connection: Wafer
Operate: Manual, Worm gear, Pneumatic, Electric-Motorized
Disc type: One stem no-pin, Double stem no-pin




 

Electric Actuator

Ultra-small size, delicate appearance (L104-W70-H90)

Rated torque:20Nm

Enclosure level:IP67

Mechanical port:ISO5211(F03/F04/F05)

Output shaft:Male square 12X12, Female octagonal 8X8/11X11/14X14

Adopt high performance brushless motor,

overall actuator could be used 20,000 times *1

TCR series means whole plastic casing: ABS/PC+PET

TCN series means die-casting aluminum casing, surface passivation spray-paint.

	Product Model	Rated Voltage	Time	Additional Function	Remarks
	TCR/TCN-02N Normal on/off model	DC12/24V AC24/110/220V	10S@DC Series 15S@AC Series	HTR(anti-condensation heater)	Dry contactor feedback Feedback signal is asynchronous with actual arrival
		AC/DC24V AC/DC95-265V	10S	KT32(failsafe) HTR(anti-condensation heater)
	TCR/TCN-02C Intelligent on/off model	DC12V AC/DC24V AC/DC95-265V	10S	KT32(failsafe) A(alarm signal output) HTR(anti-condensation heater)	Feedback signal is synchronous with actual arrival *2 PUL speed adjustment PWM speed adjustment 0.9/1.3" OLED screen Perform 2-way/3-way/4-way mode
	TCR/TCN-02T Intelligent modulating model	DC12V AC/DC24V AC/DC95-265V	10S	KT32(failsafe) A(alarm signal output) HTR(anti-condensation heater)	0.9/1.3" OLED screen Control feedback mode: 4-20mA/0-20mA/0-10mA 0-5V/1-5V/0-10V/2-10V *3
	TCR/TCN-02B Intelligent bus model	DC12V DC24V AC95-265V (No suggest)	10S	KT32(failsafe) HTR(anti-condensation heater)	0.9/1.3" OLED screen Internal with rechargeable batteries Could keep working for 60days after power-cut Pluse or Time timer mode Loop by days or weeks
	TCR/TCN-02R Intelligent wireless model	DC12V AC/DC24V AC/DC95-265V	10S	KT32(failsafe) HTR(anti-condensation heater)	Wireless ON/OFF model(ON/OFF) 0.9/1.3" OLED screen Wireless modulating model, modulate precision is 5‰ Communication frequency:433/868/915MHZ LORA: The max is 2.5km (cleared area) ENOCEAN:20-100m*5

Notice:

*1. Test condition: Rated load, test at factory environment of 25ºC temperature and 50% humidity , lead the result from 2 times switching cycle,

which will be influenced by different load and working environment.

*2. The relay feedback is dry feedback signal, which will be disappeared when power-cut, and then will be recovery when power-on.

*3. The control terminal adopts two ways independence input: One way is 0-10V,2-10V,0-5V,1-5V . The other is 0-20mA,4-20mA,0-10mA.Both could be selected by menu.

The feedback terminal also adopts two ways independence output: One way is 4-20mA , the default is output . The other is 2-10V ,the default is output .

Both of them could be changed to 0-20mA or 0-10V output.

*4. For bus mode,it's not recommend to use AC95-265V,because AC power could influence the communication reliability of the whole network.

*5. The OCEAN mode of wireless model provide self-powered telecontrol switch, while the LORA mode provide wireless centralized controller.

Wireless model doesn't have mechanical manual function. But under power-on condition it could be control valve on or off by key-press and menu in local.

 

ABS: Supply by CHIMEI from China Taiwan,which has excellent anti-temperature characteristics,-20-80ºC.

PC+PET: Supply by LG Company, whose anti- temperature, anti-impact and chemical corrosion resistance characteristics are better than ABS,

but it will be surely cost more.

PWM: The influence of speed adjustment to torque, the lower speed ,the smaller torque ,the max will be reduce more than 35%.

PUL: Speed V has little influence to torque, the torque would be reduce about 15%

HTR: Anti-condensation heater ,built-in module, when the internal temperature is below 25ºC,the actuator will turn on heating function, which power is 2W.

A: Means fault feedback signal, which is relay dry feedback signal.

KT32: Normal series only has power-cut close function,but Intelligent series could operate command(ON/OFF/KEEP) by menu after power-cut.

Features:        
1: The butterfly valve adopts wear-resistant soft backrest seat.
The valve plate and valve shaft are integral straight shaft without pin type,
which is convenient for maintenance and replacement.
2: The valve plate adopts a frame structure with high strength,
large flow area and small flow resistance coefficient.
3: The top of the valve plate adopts a spherical design,
which greatly reduces the friction between the valve plate and the valve seat,
and achieves the effect of low torque and high pressure double-sided holding pressure.
4: The valve body paint is sprayed with high-performance outdoor anti-corrosion paint,
which can effectively prevent rust.
5: The valve has novel structure, flexible operation, low torque and convenient installation,
and can be equipped with various driving methods.

 

FAQ

1. Can you OEM or ODM?
A:Yes, we have a great research & development team. The products can be made according to your request.

2. Can you provide the relevant documentation and certificate?
A:Yes, we can provide you with the documentation and certificate you need ,IS09001:2000 international quality system certification,(CE)certification of the European Community, Det Norske Veritas (DNV) factory certification, Lloyd's Register (LR) factory certification, China Classification Society (CCS) quality system certification and the FM and UL certification of the US, Bureau Veritas(BV) ,American Bureau of Shipping(ABS) etc.Of course we can also provide you the test Report; Certificate of Material Analysis; Certificate of Origin; and other export documents which required.

3.Can you do the design for us?
A:yes.Please send us high resolutionimages,your logo and other materials needed . We will send you finished files for confirmation.

6.How to proceed an order for valve?
A: Step1 let me know your requirements or application. Step 2 We quote according to your requirements or our suggestions. Step 3 Customer confirms the samples and places deposit for formal order. Step 4 We arrange the prodution.

7.What is your terms of delivery?
A: We accepte EXW,FOB,CIF,etc. You can choose the one which is the most convenient for you.

8.What's the package and how do you ship the goods?
A: Usually is wood pallet as your requst. We usually ship by sea.Airline shipping is also optional.

9. How to deal with after sales ?
A: warranty time : 12 months from the shipment ; and we will be responsible for all the quality problems. Quality control : High quality mold./Raw materials control/Production process quality control/Final inspection/Water testing (no leaking).


ABOUT US: