Air Relief /Safe Valve for Central Air Conditioning System

• Customization: Available
• Media: Oil
• Temperature: Ordinary Temperature
• Connection: Thread
• Pressure: Non-Ajustable
• Closed: Open
• Structure: Lever
• Material: Cast Iron
• Size: Pn1.0-32.0MPa
• Transport Package: Wooden Case
• Specification: PN1.0-32.0MPa
• Trademark: HUIZHENG
• Origin: China
• HS Code: 8481804090
• Production Capacity: 3000

Product Description

1. Brief Introduce Cast Iron Air Relief Valve

    The exhaust valve is used in independent heating system, central heating system, heating boiler, central air conditioning, floor heating and solar heating system. As there is usually air dissolved in water, and the air solubility decreases with increasing temperature, so the water cycle process gas gradually separated from the water, and gradually come together to form large bubbles or column, because of water added, so often gases. The exhaust valve is divided into heating type, micro type, fast type, compound type, etc..
Exhaust valve is an essential auxiliary component in the pipeline system, which is widely used in boilers, oil and gas, water supply and drainage pipeline. Often installed in the high ground or elbow, etc., to exclude excess gas pipeline, improve the efficiency of the use of pipe road and reduce energy consumption. HVAC system and HVAC system in the operation process, release of water in the heating gas (such as hydrogen and oxygen) many adverse effects will damage the system and reduce the thermal effect of these gases, such as not timely drain will have many adverse consequences. Such as: corrosion caused by oxidation; the formation of air pockets in the radiator; hot water circulation is not smooth and unbalanced, so that some of the local heat radiator is not hot; pipeline with the noise of the operation of the gas; circulation pump vortex phenomenon.

2. The Parameters of Cast Iron Air Relief Valve

Model	2W160-10	2W160-15	2W200-20	2W250-25	2W350-35	2W400-40	2W500-50
Working Medium	Air, Water, Oil, Gas
Motion Pattern	Direct Drive Type
Type	Normal Close Type
Aperture of Flow Rate mm	16		20	25	35	40	50
CV Value	4.8		7.6	12	24	29	48
Joint Pipe Bore	3/8″	1/2″	3/4″	1″	1 1 /4″	1 1 /2″	2″
Operation Fluid Viscosity	Below 20CST
Working -pressure	Air: 0~1.0Mpa. Water: 0~0.1Mpa. Oil: 0~0.1Mpa
Max. Pressure Resistance	1.0Mpa
Operating Temperature	-5~80 degree
Voltage Range	±10%
Material of Body	Brass
Material of Oil Seal	NBR or VITON